Filter
Top Products
40
Jam (TurnOver)
Jam (Hopper)
Jam (Transfer)
Troubleshooting
Layout of rollers inside the printer
Below is a diagram of the layout of rollers inside the printer. Refer to this diagram in the event of card jams
and when cleaning the rollers.
Retransfer film cassette Ink ribbon cassette
Thermal head
Card feed rollers
Card jams (card turnover unit) (see p.45)
Card jams (card turnover unit) (see p.44)
Card jams (card turnover unit) (see p. 45)
Cleaning rollers
Card feed rollers
Bend remedial roller (heat roller)
Retransfer roller (heat roller)
All rollers require routine cleaning.
• The card feed rollers, bend remedial
roller and retransfer roller can be
cleaned on cleaning mode.
(See p.38 in this manual.)
• The cleaning roller can be cleaned by
water washing.
(See p.35 in this manual.)
Magnetic head
Card turnover table
How to clean the feed roller
1.
Open the card tray, and take out the cards from
the tray.
2.
Move the card bracket until it locks.
3.
Clean the feed roller with felt (sold separately)
soaked with absolute ethanol.
Feed roller