Filter
Top Products
27
(to the next page)
User mode settings
>Bend Remedy>
>Retransfer>
>>Media Type
>>Temp. Level
>>Speed (Front)
>>Speed (Back)
Standard:0
0(Standard)
-2
-2
Standard : 0
Standard
0
+2
+2
0
+2
None
YMCK : 0
0
0
0
SKY BLUE
off
Standard
Hi-Co
On
Total
>>Temp Level
>>Speed
>>Cooling Time
off
-2
-2
>Ink>
>>Ink Type
>>Black Level
YMCK:0
0(Standard)
>>Black Mode
>>SP-Ink 1
Standard
-3
>Display>
>Power Saving
>>Counter
>>Contrast
>>Back Color
Total
-2
BLUE
>Cleaning>
>Card Size
>MG ISO Type
>Buzzer
Transport mode
>Counter Reset
Off
OK?
Standard
Lo-Co
On
OK?
OK?
>IC Antenna Pos.
None
>Ic Contact Pos.
None
>>SP-Ink 2 Level
>Test Print
OK?
Main menu Submenu
Factory setting
Display mode
Ink mode
Retransfer mode
Bend Remedy
mode
3 counter type settings: [Total, Head, Free]
LCD contrast setting: 7 gradations from –3 to +3, the higher the value
the stronger the contrast.
LCD background color setting: 8 options
See p. 28
See p. 30
See p. 31
See p. 33
See p. 29
See p. 29
See p. 32
See p. 32
See p. 34
See p. 34
See p. 34
See p. 34
See p. 34
Counter reset mode
For free counter resetting: press the ENTER button.
Cleaning mode
For cleaning mode setting: Magnetic head and card feeder roller execution
Setting the ink ribbon: set the ink type
Setting the black value K: 7 gradations can be set from –3 to +3, the
larger the value the darker the printing.
Setting the K printing mode: 2 options [standard and fine]
Setting the retransfer film: setting the film type
[1000, 250] - two types
Setting the retransfer roller temperature: 8 gradations can be set from –5 to
+2, the larger the value the higher the
temperature.
Setting the retransfer speed: 5 gradations can be set from –2 to +2,
the larger the value the faster the speed.
Setting the rear retransfer speed: 5 gradations can be set from –2 to +2, the
larger the value the faster the speed.
Buzzer mode
Setting the buzzer ON/OFF: 2 settings [on
and off]
Power saving mode
Setting the time for the power saving mode: 9 options [off, 5, 10, 15, 20, 25,
30, 45 and 60] (units: minutes)
Bend remedy roller temperature setting: 9 gradations can be set from –5 to
+2, the larger the value the higher
the temperature.
Bend remedy speed setting: 5 gradations can be set from –2 to +2,
the larger the value the faster the speed.
Cooling time setting: 16 gradations can be set: none and 1–15 (units
seconds).
Card setting mode:
Card Size setting: 2 options [Standard and
Cybernetic]
Antimagnetic setting mode:
ISO card antimagnetic setting: 2 options [Lo-Co
and Ho-Co]
Non-contact IC antenna setting mode:
Non-contact IC antenna position setting:4 options [None, Built-in, Ext.
Unit, Added on]
IC contact position setting mode:
IC contact position setting: 3 options [None, Built-in, Ext. Unit]
Test print mode:
to carry out test printing: press the ENTER button.
Setting the special ink SP-Ink 1, SP-Ink2 darkness:
7 gradations can be set from –3 to +3, the larger the
value the darker the printing.
Transfer Mode:
Transfer mode setting: press the ENTER button.
See p. 34