Filter
Top Products
23
(to the next page)
Operation display LED contents
and the LCD panel
For details, see p. 41 – 43 of this manual.
Initialization period
When the power is turned on, the printer performs
positioning of the ink ribbon and retransfer film. It also
initializes the mechanisms of the printer and check
their operations. “Initializing” is dispalyes on the LCD
panel during this period.
Preheating period
When the initialization of the mechanisms completes
normally, the printer increases the temperatures of the
retransfer roller and bend remedial roller up to the
specified levels. “Preheating” is dispalyes on the LCD
panel during this period.
LCD operation display content
Printer status
Mechanism set
period
Preheat period
Ready period
Printer operation
period
Error occur
User mode
READY ERROR LCD panel
Initializing..
Preheating..
Ready
When an error
occurs
*Depends on the
error content
Depends on the
user mode content
or
: LED on
: LED off
Initializing..
Preheating..
Loading..
Printing..
Encoding..
Retransfer..
Unloading..
Cleaning..
Sleeping..
Ready
Boot Up..
Ver. xxx/xx/xx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
OS booting up
(this may not be
displayed.)
* Firmware version
Shows firmware
version number.
Displayed during
the initialization
process.
Displayed during
preheating
*Displays Free/Head or
Total, according to the
counter select setting.
Displayed during
feeding
Ready status
* Print counter
Displayed during
printing
Displayed during
encoding
Displayed during
retransfer
Displayed when cards
are discharged from
the NG card outlet
Displayed during
cleaning operations
When the heater
status is OFF
because of the
power save function