Filter
Top Products
&RQ¿JXULQJ&OLHQW6HWWLQJV
&RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV
114
Application Sub-tab
Window Settings
Item Description
Color Depth
Click the drop-down menu to select the desired color quality for a Citrix ICA
session. Three options are available: 32K Colors, 16M Colors, and Automatic.
Window Size
Click the drop-down menu to select the desired window size of a Citrix ICA
session. Four options are available: Full Screen, 1280x1024, 1024x768, and
800x600.
Device Mapping
Item Description
Mapping Local USB Storage
Click the drop-down menu to enable/disable the mapping of the local USB drive(s)
and to select access type in a Citrix ICA session. Three options are available: No, Read
Only, and Read Write. If Read Only or Read Write is selected, the locally attached USB
drive(s) will become available in launched Citrix ICA sessions.
NOTE: You need to enable local USB storage drive(s) as well. See section “4.4.3
&RQ¿JXULQJ6HWWLQJVIRU86%6WRUDJH'HYLFHV´RQSDJHIRUGHWDLOV
Mapping Local Serial Ports
Click the drop-down menu to enable/disable the mapping of the local serial device(s)
in a Citrix ICA session. If Ye s is selected, the locally attached serial device(s) will become
available in launched Citrix ICA sessions.
NOTE: This setting item is not applicable to your SC-T35. However, if you use a
serial-based barcode scanner, and attach it to your SC-T35 with
a serial-to-USB adapter, you need to enable this setting in order to use
the local barcode scanner in a virtual server desktop.
Mapping local Printers
Click the drop-down menu to enable/disable the mapping of the local printer(s) in a
Citrix ICA session. If Ye s is selected, the locally attached printer(s) will become available
in launched Citrix ICA sessions.
NOTE: To enable locally attached printer(s), please refer to section “4.4.6
Adding a Local Printer” on page 64 for detailed instructions.
Connection Settings
Item Description
Rendered Type
Click the drop-down menu to select resources rendering on the endpoint or the
server. Two options are available: Server Rendered and Client Rendered.
NOTE: The Client Rendered option may not be available on your system.
Network Protocol
Click the drop-down menu to select the protocol(s) used for connection. Three
options are available: TCP/IP, TCP/IP + HTTP server location, and
SSL/TLS + HTTPS server location.
Enable Automatic Reconnect
Check/Uncheck to enable/disable automatic reconnecting after an ICA session
was interrupted.
NOTE: Automatic reconnecting (Auto Client Reconnect) may not work for a
XenDesktop ICA session. This is a known issue. For more details, please
visit Citrix websites at support.citrix.com or www.citrix.com.