Filter
Top Products
&RQ¿JXULQJ&OLHQW6HWWLQJV
&RQ¿JXULQJ6HUYLFH$FFHVV6HWWLQJV
124
Common Settings
Item Description
Non-Interactive Mode
Select Yes or No to allow or disallow the Non-Interactive mode. The default is to
use the Non-Interactive mode.
Option Description
Yes
The Non-Interactive mode is used. Users are not allowed to
UHVHOHFWGLIIHUHQWVHWWLQJVLIWKHVHWWLQJVKDYHEHHQVSHFL¿HG
in View connection settings.
No
The Interactvice mode is used. Users are allowed to
re-select different settings even if the settings have been
VSHFL¿HGLQ9LHZFRQQHFWLRQVHWWLQJV
Autostart When Startup
Select whether to open a VMware View session automatically or not when your
SC-T35 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T35 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
1 Appliance
The client will start up directly with the desired
VMware View session and turn off after existing
the session.
2 Autostart
The client will start up directly with the desired
90ZDUH9LHZVHVVLRQDQGSHUIRUPWKHFRQ¿JXUHG
action after existing the session.
Available actions include:
Returning to the local desktop
Re-launching a new session
Restarting the thin client
Turning off the thin client
3 Quick Connection
The default. The client will enter ViewSonic Quick
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
On Application Exit
Select what to do when a VMware View session is ended. Four options are
available: Do Nothing, Restart Application, Reboot, and Shutdown.
Option Description
Do Nothing Returns to the Windows Embedded desktop.
Restart Application Opens a VMware View session again.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.