Filter
Top Products
&RQ¿JXULQJ&OLHQW6HWWLQJV
&RQ¿JXULQJ1HWZRUN6HWWLQJV
71
Obtaining DNS Server Addresses Automatically
To obtain DNS Server addresses automatically, please do the following:
NOTE
t You cannot obtain DNS server addresses automatically through the DHCP server if
you choose not to get the IP address via the DHCP server.
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Dynamic DNS (via DHCP) for the DNS type eld.
3. Click Save to apply.
Specifying DNS Server Addresses Manually
To specify DNS Server addresses manually, please do the following:
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Manual setting.
3. The Search domain, Nameserver 1, and Nameserver 2 elds appear in the DNS section.
NOTE
t If you choose to use a static IP address for your SC-T35 thin client, then you need
to specify DNS server addresses manually. In this case, the DNS type eld will not
appear for you to select Manual setting or Dynamic DNS (via DHCP).
4. Type in the preferred DNS server address in the Nameserver 1 eld and the alternate DNS server address in
the Nameserver 2 eld if any.