Filter
Top Products
136
A.4 Conguration for RD Gateway and Power Saving
— Newly added features in SC-T35 thin clients with the rmware version 2.54-PREF or the Later
The Scenario where Applicable
This document provides important information for SC-T35 thin clients with the rmware version 2.54-PREF or
the later, and is as a supplement to the User’s Manual for SC-T35 when a newer rmware version is deployed.
Bypassing RD Gateway for Local Addresses
Bypassing RD Gateway for local addresses is now added to the Client Setup console.
To access RD Gateway settings of an RDP connection, on the default Quick Connection screen, click Setup
>
Applications > Remote Desktop, click an existing connection entry or click Add to add a new one, and then
click RD Gateway > Use RD Gateway server.
NOTE
t Bypass RD Gateway for local address is enabled by default.
RD Gateway Sub-tab
Connection Settings
Item Description
Use RD Gateway server
Check/Uncheck to enable/disable the use of an RD Gateway server. When
checked, the following two items in this table appear.
Server Name
Type the name of the RD Gateway server. Ask the network administrator for
this information.
Use my Remote Desktop
credentials for the RD Gateway
Check to use the same set of credentials for authenticating to both the Remote
Desktop computer and the RD Gateway server.
Bypass RD Gateway for
local address
&KHFNWRSUHYHQWWUDI¿FWRDQGIURPORFDOQHWZRUNDGGUHVVHVIURPEHLQJURXWHG
through the RD Gateway server. This could make your RDP connection faster.