Filter
Top Products
Remote Operation
4–28 TM-XDOP-01XN
To check ranges:
SOUR:VOLT:LIM:HIGH?
SOUR:VOLT:LIM:LOW?
SOUR:CURR:LIM:HIGH?
SOUR:CURR:LIM:LOW?
SOUR:POW:LIM:HIGH?
SOUR:POW:LIM:LOW?
Example:
To set voltage to 5.5V and current limit to 100A, send the command:
:VOLT 5.5; :CURR 100
Then check the output:
MEAS:VOLT?
5.500 (example readback, default unit V)
MEAS:CURR?
0.010 (example readback, default unit A)
MEAS:POW?
0.005 (example readback, default unit W)
TM-XDOP-01XN.book Page 28 Monday, July 17, 2006 11:19 AM