Xantrex Technology XDC 20-600 Power Supply User Manual


 
Operation
3–28 TM-XDOP-01XN
To access and work with the USER LINES menu option:
Aux line B has been selected to be configured.
To configure Aux line B:
Step # Do This You Will See
1ERROR MSGS
2
a
a. You can also press MENU again to bring up the AUX LINES option.
USER LINES
3
Aux line A
4
or to select which line to
configure.
Aux line B
5Cfg None
MENU
ENTER
ENTER
Step # Do This You Will See
1
Press repeatedly until the desired
option appears. For this example, CV is
selected.
Cfg CV
2 Pol Act High
3
Press repeatedly until the desired
option appears.
Select either “Act High” (Active high logic)
or “Act Low” (Active low logic) for the
auxiliary lines. In this example, Active Low
is selected.
Pol Act Low
4 This setting is saved and
the display returns to its
default operating mode.
ENTER
ENTER
TM-XDOP-01XN.book Page 28 Monday, July 17, 2006 11:19 AM