Filter
Top Products
Operation
3–32 TM-XDOP-01XN
Last Setting
Selecting Last Setting lets you restore the settings that are in use when the power
supply is powered off, the next time it is powered on.
To select Last Setting:
Auto-Sequence
Auto Sequence lets you recall a stored program next time the unit is powered on.
(Assumes at least one program has been saved in memory. See “Using Auto
Sequencing” on page 3–42.)
To select Auto Sequence:
Step # Do This You Will See
1 ERROR MSGS
2
2 times
a
.
a. You can also press the Down arrow 2 times.
PON CONFIG
3
Last Setting
4
Out ON? Y
5
to select, or
and to change.
The default display for the
selected operating mode.
MENU
MENU
ENTER
ENTER
ENTER
ENTER
Step # Do This You Will See
1 ERROR MSGS
2
2 times
a
.
a. You can also press the Down arrow 2 times.
PON CONFIG
3
Last Setting
4
3 times
b
.
b. You can also press the Down arrow 3 times.
Auto Sequence
5
Auto Seq 1
6
or to scroll
c
,
to select.
c. You can scroll through up to 10 stored programs.
The default display for the
selected operating mode.
MENU
MENU
ENTER
MENU
ENTER
ENTER
TM-XDOP-01XN.book Page 32 Monday, July 17, 2006 11:19 AM