Filter
Top Products
SETTING THE SYSTEM CONFIGURATION
XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-57
Adding a DFA profile
The values you enter for a DFA profile are provided by the vendor of
your finishing equipment, except the Set Media Modification (SMM)
values for Finishing Functions 1 and 2 (if used). The SMM values are
specified in the job by your applications programmer.
To create a new DFA profile:
1. Locate the DFA Profile pull-down menu on the IPS main window
(below the Output Configuration pull-down menu).
Figure 4-46. DFA Profile pull-down menu
Note: The DFA Profile menu displays only if you have DFA
enabled on your IPS.
2. From the DFA Profile pull-down menu, select any name to use
as a base for the new profile. (You will rename the new file, so
the existing file you selected to build from will not be changed.)
Figure 4-47. DFA Profile Name pull-down menu