Filter
Top Products
INTRODUCTION TO THE GRAPHICAL USER INTERFACE
XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 1-5
Buttons
A selection button displays as an oval or box (except for the Stop and
Continue buttons) containing a function name, but no inverted
triangle.
Figure 1-6. Example of a selection button from the IPS main
window
To use a button:
1. With the cursor positioned over the button, click the left mouse
button.
2. If the selection button is a toggle (turning a selection on/off),
you can alternately select and deselect it by repeatedly clicking
it with the left mouse button.
Incremental spin buttons An incremental spin button consists of a line displaying a numeric
value, with buttons next to it containing arrows.
Figure 1-7. Example of incremental spin buttons
To select an item that has incremental spin buttons:
1. Position the cursor on the triangle (up arrow) button to increase
the value displayed, or on the inverted triangle (down arrow) to
decrease the value.
2. Repeatedly click or hold down the left mouse button until your
desired value is displayed.
Note: You can also enter the values on the line next to the spin
buttons. Refer to “Entering text,” later in this chapter.
Note: On some windows, the value you enter or select is displayed
in the lower-left or -right corner of the window. It remains until you
close the window or enter a selection/value elsewhere on that same
window.
Cancel Job