Filter
Top Products
INTRODUCTION TO THE GRAPHICAL USER INTERFACE
XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 1-11
• Interface — Allows you to specify the current interface and the
interface options you want to use.
• Resolution — Allows you to specify the resolution of the fonts
and other resources in the incoming job (240 or 300). This
resolution must match the font resolution in the PSF start-up
procedure (PROC) for MVS, or the font resolution set up by the
PSFCFG command for AS400.
Note: When you change the resolution, you must reboot the
system.
• Modem Enable/Disable — Enables or disables the modem if it
is installed by your service representative for diagnostic
purposes. This modem is used for dial-in servicing and
diagnostics when needed by your service representative.
• Maximum Simplex — For jobs containing both duplex and
simplex pages; the Maximum Simplex option allows you to
specify the maximum number of simplex pages that will print in
duplex mode before the system clears the paper path and
switches to simplex mode.
• Slumber Mode Timer — Not supported on the 4050/4090 IPS.
• MICR Mode — Not supported on the 4050/4090 IPS.
• Extraction Color — Not supported on the 4050/4090 IPS.
• Continuous Form Emulation — Rotates the page origin 90
degrees. This allows the IPS to print on cut sheets the jobs
designed for a continuous forms printer.
• Resource Limits — Enables you to allocate additional memory
for resources such as forms, fonts, and page segments.
• Media Units — Allows you to specify the units of measurement
to use for weight and size.
• Optional Processing Parameters — Allows you to set
processing parameters such as the model number reported to
the host.
• Resident Fonts — Allows you to display current resident fonts
on your system, and to add new resident fonts.