Filter
Top Products
SETTING THE SYSTEM CONFIGURATION
4-10 XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Specifying the media units
This section describes the procedure for specifying the media units
you want to use for weight and size. The specified units are used on
the IPS main window.
To specify the weight and/or size units:
1. From the Configuration menu, select Media Units. The Media
Units window displays.
Figure 4-5. Media Units window
2. For weight, select g/m
2
or lb as the desired units.
3. For size, select mm or in as the desired units.
4. Click Apply. A confirmation window displays.
5. Click OK to confirm your selections.