Filter
Top Products
XES COMMAND LANGUAGE MODE
Y The y-coordinate of the starting point of the line;
the distance in pixels from the page origin, along
the y-axis to the starting point.
L The length of the line; the distance in pixels from
the starting point to the end point.
T The thickness of the line, in pixels.
S The degree of ink shading on a scale of 0 to 15. If
no shading is desired, the
S value can be omitted.
See figure 2-16 for the 15 degrees of shading.
, Commas separate the variables.
L Line end.
Where to place it At any point in the job where the line is desired.
Example See the sample that follows.
More The Line Draw commands create nongraphic lines; that is, lines
that do not need graphic windows. Nongraphic lines can only be
drawn on either the x- or y-axis, horizontally or vertically; they
cannot be drawn diagonally. Refer to “What is a graphic window”
for information on graphics windows.
The following figure shows a horizontal line drawn on the x-axis
of a short edge feed portrait page, the starting point of which
begins at four inches across the page and 6 inches up. It is two
inches long and 80 pixels thick. It is printed in black; no shade of
grey is selected.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-63