Filter
Top Products
XES COMMAND LANGUAGE MODE
X , Y The origin of the graphic window. X is the distance
along the page’s x-axis from the page’s origin to
the graphic window’s origin. Y is the distance
along the page’s y-axis from the page origin to the
graphic window origin.
Sx,Sy The size of the graphic window, in the horizontal
and vertical directions, respectively. S
x is the
number of pixels making up the size in the
horizontal direction, measured from the graphic
window origin. S
y is the number of pixels making
up the size in the vertical direction, measured from
the graphic window origin.
L Line end.
Where to place it At any place within the document where graphics are desired.
More Fields before the semicolon in the command are optional; fields
after it are required. Thus, you could leave the M , I and R fields
blank; the printer will still create a window based on the values
entered for X,Y,S
x,Sy. If you enter a value for R, but none for M
and I, then commas must be inserted in place of M and I. The
command for such a window looks like this if 180
o
rotation is
chosen:
E
gw,,2;900,3000,600,450L
Example To create a graphic window:
• With no magnification
• Filled with vector commands
• Whose origin is located 900 pixels on the x-axis, 3000 pixels
on the y-axis from the origin of the page
• Measuring from its own origin, 600 pixels along its x-axis,
450 pixels on its y-axis,
Enter:
E
gw1,2;900,3000,600,450L
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-83