Filter
Top Products
XES COMMAND LANGUAGE MODE
Syntax
ErDnc
r The instruction for relative placement
D A character indicating the direction from the current
text position in which the text is to be placed:
u Up
d Down
l Left
r Right
n The distance in pixels (or 1/300th inch) from the
current text position to the new text position.
c Any non-numeric character can be used to complete
this command.
Note: This is one of a few commands using a printable character
rather than a line end for completion. Do not use a line end.
Where to place it Immediately after the current text (that is, the text being used as
a point of reference) and immediately before the text to be
affected.
More For both landscape and portrait pages, it is possible to print text
off the left edge of the page. For example, entering E
rl3000b will
not cause an error. However, any text after the command and
before a line end will print off the page.
Example To place text 75 pixels to the left of the current position, enter
(Current text)E
rl75e(New text)
As shown in figure 2-13, the final word of a sentence is placed
1500 pixels down from the current text position.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-61