Filter
Top Products
LJ SERIES 2D EMULATION
Vertical Rectangle Size (Decipoints)
Purpose The Vertical Rectangle Size (Decipoints) command defines in
decipoints (720ths of an inch) the height of the next rectangle to
be drawn
Syntax
E
*c#V
Hex 1B 2A 63 # 56
Dec 27 42 99 # 86
where # is a number up to four decimal places representing the
height of the rectangle in decipoints.
Vertical Rectangle Size (Spots)
Purpose The Vertical Rectangle Size (Spots) command defines in spots
(300ths of an inch) the height of the next rectangle to be drawn.
Syntax
E
*c#B
Hex 1B 2A 63 # 42
Dec 27 42 99 # 66
where # is an integer representing the height of the rectangle in
spots.
Area Fill ID
Purpose The Area Fill ID command sets the level of shading or type of fill
pattern to be used when filling a rectangular area. There are six
fill patterns and eight densities of shading. Each of the fill
patterns is identified by a number between 1 and 6. Each
shading density covers a range of values from 1% to 100%.
Syntax
E
*c#G
Hex 1B 2A 63 # 47
Dec 27 42 99 # 71
where # is a value between 1 and 6 for a fill pattern or between
1 and 100 for shading (see figures 3-5 and 3-6.)
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-55