Filter
Top Products
XES COMMAND LANGUAGE MODE
Where to place it Anywhere bolding is desired, enter the Bold Start command
immediately before the first character to be bolded and the Bold
Stop command immediately after the last character to be bolded.
Example To produce:
It is possible to bold text without using a bold font; simply
insert the appropriate commands.
Enter:
It is possible to bold text Ebwithout using a bold font;
Epsimply insert the appropriate commands.
More In most cases, using a bold font gives better results, especially
for large sections of text.
Underline Start/Underline Stop
Purpose Underlines text.
Syntax
Eu
Syntax
Ew
u Instruction to start underlining.
w Instruction to stop underlining.
Where to place it Anywhere underlining is desired.
Example To produce:
It is possible to underline text by using the following
commands: Underline Start and Underline Stop.
Enter:
It is possible to underline textEuby using the following
commands
Ew: Underline start and Underline stop.
More Both the thickness of the underline and its distance from the
character it underlines are determined by the size of the current
font in the line. So if you underline in a large font and then
change to a small font for the text in the next line, you may want
to enter the Font Change command for the smaller font before
entering the line end. This will prevent the underline for the
larger font from crowding the smaller characters on the next line.
The underline character prints under the character descender.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-69