Filter
Top Products
Windows 98 and Windows Me
Phaser® 5500 Laser Printer
3-28
Verifying Settings
1. Right-click Network Neighborhood on the desktop, then click Properties.
2. Click the Configuration tab. A list of installed network components appears for the
following items:
■ Client for Microsoft networks
■ Xerox TCP/IP Port Monitor
3. If you are running CentreWare DP verify the following:
■ Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft
Client for IPX networks.
■ TCP/IP Networks: No additional software is required, but your printer must have a
valid TCP/IP address assigned.
4. If any of the above protocols or services are not installed, install the necessary components
and restart the system. When the system is restarted, return to this document.
5. Click Start, click Settings, then click Printers. The Printers window appears.
6. Right-click the printer icon, then click Properties.
7. Select the Details tab.
8. Verify the following:
a. The printer driver name in the Print Using the Following Driver list. If necessary, re-
select or install a new printer driver.
b. The Port name in the Print to the Following Port list. If necessary, re-select the
correct name.
9. Send a print job to the printer. If the printer does not print, access PhaserSMART
Technical Support from the Troubleshooting tab of the Windows printer driver or go to
www.xerox.com/office/support
.
infoSMART Knowledge Base Documents (English only)
For more information, go to www.xerox.com/office/5500infoSMART to view these
documents.
Reference Name Title
R100207118 Installing a Windows 98/Me printer driver