Filter
Top Products
Front Panel Messages
Phaser® 5500 Laser Printer
4-65
Jam At Tray 5; Remove Tray To Clear
(Jam C4-4)
1. Remove Tray 5.
2. Remove the jammed paper.
3. Reinsert Tray 5.
Jam At Tray 6; Slide Out Tray 6
Feeder And Open Door J To Clear
(Jam C5-1, C5-2, C8-5)
1. Lift Tray 1 (MPT).
2. Slide the Tray 6 feeder away from the printer.
3. Open Door J and lift the handle inside.
4. Remove the jammed paper.
5. Close the access handle and Door J.
6. Slide in Tray 6 feeder.
7. Lower Tray 1 (MPT).
Maintenance Kit Is Near End Of Life The Maintenance Kit (Fuser, Transfer Roller, and feed
rollers) is near the end of its life.
Warning - when the Fuser is replaced, use caution, some
components inside Door A may be hot.
Order replacement P/N 115R00033 if the printer is
powered by 110V or P/N 115R00034 if powered by 220V.
Manual Feed [size*] [type*] The print job has requested manual feeding.
1. Remove all paper from Tray 1 (MPT).
2. Load paper of the indicated size and type into
Tray 1 (MPT).
No Paper in Tray [2 | 3 | 4 | 5 | 6]. Load paper in the indicated tray.
Non-Xerox Drum Cartridge The Drum Cartridge is not a genuine Xerox product. Any
damage caused by non- Xerox consumables will not be
covered under the printer warranty. Status reporting is
reduced. Only Standard Print Quality is supported.
Warning - Use caution, some components inside Door A
may be hot.
1. Open Door A.
2. Open the Printer Front Door.
3. Lift the Drum Cartridge latch and remove the cartridge.
4. Replace with P/N 113R00670.
5. Close Door A.
6. Close the Printer Front Door.
Non-Xerox Toner Cartridge The Toner Cartridge is not a genuine Xerox product. Any
damage caused by non- Xerox consumables will not be
covered under the printer warranty.
Status reporting is reduced. Only Standard Print Quality is
supported.
1. Open the Printer Front Door.
2. Pull out the Toner Cartridge.
3. Replace with P/N 113R00668.
4. Close the Printer Front Door.
Error or Warning Messages (Continued)
Message Description