Filter
Top Products
Custom Size Paper
Phaser® 5500 Laser Printer
2-65
3. Push the tray completely into the printer.
4. If prompted at the printer’s front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
■ Select Change, then press the OK button.
■ Select Custom, then press the OK button.You are prompted to enter the custom
width and custom height.
Note
When setting Custom Width (W) and Custom Height (H) on the front panel,
verify that you are selecting the correct width and height values for the paper size and
orientation (long-edge feed or short-edge feed).
5. Select Custom Width (W), press the Up Arrow or Down Arrow button to select a
value, then press the OK button.
6. Select Custom Height (H), press the Up Arrow or Down Arrow button to select a
value, then press the OK button.
7. Press the Back button two times, the press the OK button.
Long-Edge Feed Short-Edge Feed
5500-065
5500-153
H
W
5500-154
W
H