Filter
Top Products
Postcards
Phaser® 5500 Laser Printer
2-53
■ Insert Small US postcards short-edge feed and facedown into Tray 1 (MPT) only.
Place the top of the postcard toward the rear of the printer.
Envelope Tray
■ Insert Large US and A6 postcards long-edge feed and faceup into the optional
Envelope Tray. Place the top of the postcard toward the left of the tray.
2. Adjust the paper guides to the size of the postcards.
3. If prompted at the printer’s front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a. Select Change, then press the OK button.
b. Select Card Stock, then press the OK button.
c. Select the paper size, then press the OK button to save your selection.
4. In the printer driver, select Card Stock as the paper type or Tray 2 as the paper source.
5500-257
5500-278