Filter
Top Products
Front Panel Messages
Phaser® 5500 Laser Printer
4-69
Stapler Is Empty. Replace the Staple Cartridge. Printing continues without
stapling.
1. Open Door G.
2. Replace Staple Cartridge P/N 008R12941 above R1
area.
3. Close Door G.
Temperature Sensor Failure An error was detected in the temperature sensor. Print
quality may be degraded.
1. Turn power off, then on.
2. If error continues, call Service.
Toner Cartridge Failure The Toner Cartridge has failed and it must be replaced.
1. Open the Printer Front Door.
2. Pull out the Toner Cartridge.
3. Replace with P/N 113R00668.
4. Close the Printer Front Door.
Toner Is Low The Toner Cartridge is almost empty.
Order replacement P/N 113R00668.
Tray [2 | 3 | 4 | 5 | 6] Failure Open And Close Tray [2 | 3| 4 | 5 | 6]. An error was
detected in Tray [2 | 3 | 4 | 5 | 6]. Printing continues using
other input trays.
1. Open and close Tray [2 | 3 | 4 | 5 | 6].
2. If error continues, call Service.
Tray [2 | 3 | 4 | 5 | 6] is missing Reinstall the indicated tray.
Tray [2 | 3 | 4 | 5 | 6] Paper Is Low. The indicated tray is nearly empty. Reload the same size
and type of paper soon.
Tray [2 | 3 | 4 | 5] Failure Open And Close Tray [2 | 3 | 4| 5]. An error was detected in
Tray [2 | 3 | 4 | 5]. Printing continues using other input
trays.
1. Open and close Tray [2 | 3 | 4 | 5].
2. If error continues, call Service.
Tray [2 | 3 | 4 | 5] Paper Guide Does
Not Match Size Menu
1. Check that the tray's paper guides are against the
paper stack.
2. Set the tray's Change Paper Size menu to the size of
paper in this tray.
Tray 1 (MPT) Paper Guide Does Not
Match Size Menu
1. Check that the Tray 1 (MPT) paper guides are against
the paper stack.
2. Set the tray's Change Paper Size menu to the size of
paper in this tray.
Error or Warning Messages (Continued)
Message Description