Filter
Top Products
Page 26 Web Print Manager Tool User Guide
Network Menu
EtherTalk Page (8830/8825 printers only)
Navigation: PRINTER DEFAULTS > NETWORK > EtherTalk
If you entered the printer password in the Session Setup, you can change the
following EtherTalk parameters in the printer:
1. Enabled - Click on this check box to enable/disable EtherTalk on the printer.
2. EtherTalk Zone - Enter the AppleTalk zone name (up to 31 characters) upon
which the printer operates in this text box. Enter * (asterisk) to use the
EtherTalk router's default zone.
3. EtherTalk Phase - Click on the Phase 1 or Phase 2 radio button to select the
EtherTalk phase.
4. AppleTalk Printer Name - Enter the printer name (up to 31 characters) for
the AppleTalk protocols in this text box.
5. Press the Update Printer button to send the requested parameter changes to
the printer. Note that if the Enabled box is not checked, the parameters will be
updated but EtherTalk will remain inactive on the printer.
NetBEUI Page (8830/8825 printers only)
Navigation: PRINTER DEFAULTS > NETWORK > NetBEUI
If you entered the printer password in the Session Setup, you can change the
following NetBEUI parameters in the printer:
1. Enabled - Click on this check box to enable/disable NetBEUI on the printer.
When checked, NetBEUI is enabled.
2. NetBEUI Group - Enter the group name (up to 15 characters) of the printer in
this text field.
3. NetBEUI Machine Name - The field displays the NetBEUI Machine Name for
the printer. This is a read-only field.
4. NetBEUI Remark - In this text box, enter the Remark string (up to 47
characters) for the NetBEUI protocol. This field is used to identify the printer
with a name that is recognizable on your network.