Filter
Top Products
Page 44 Web Print Manager Tool User Guide
Processing Defaults Menus
Finishing Page
This description applies to the XES 8830 folder.
Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing
Folder Type - This read-only field displays the type of folder currently connected
to the printer. The Web PMT automatically detects the type of folder installed on
the printer.
If you entered the printer password in the Session Setup, you can change the
following printer defaults for finishing:
1. Folding Options - Click on this list box to select the printer default folding
operation. The list box will display all the folding options. You must select
a valid folding option for your folder type (the default is NO FOLD).
2. Press the Update Printer button to update the specified parameter
changes in the printer.
This description applies to any GFI folder.
Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing
Finisher Version - This read-only field displays the version of the folder currently
connected to the printer.
Finisher Model - This read-only field displays the model of the folder currently
connected to the printer.
If you entered the printer password in the Session Setup, you can change the
following printer defaults for finishing:
1. Programs - Click on this drop box to select from a list of the available
finisher programs. Directly below the Programs list is a more detailed
description of the currently selected program. Please note that the
program description will not change on the WebPMT page until the
Update Printer button has been pressed.
2. Tabs - Click on this drop box to select from a list of the available tab
override settings. Available options are Always On, Always Off, USE
PROGRAM SETTING. Default is USE PROGRAM SETTING
3. Punch - Click on this drop box to select from a list of the available punch
override settings. Available options are Always On, Always Off, USE
PROGRAM SETTING. Default is USE PROGRAM SETTING