Filter
Top Products
Web Print Manager Tool User Guide Page 27
5. Press the Update Printer button to send the requested parameter changes to
the printer. Note that if the Enabled box is not checked, the parameters will be
updated but NetBEUI will remain inactive on the printer.
6. The NetBEUI Machine Name field displays the NetBEUI Machine Name for
the printer. This is a read-only field.
TCP/IP
Navigation: PRINTER DEFAULTS > NETWORK > TCP/IP
You can use this page to view and change the TCP/IP communication
parameters of the printer’s Controller. To change settings, you will have to enter
the printer password from the Session Setup link on the Main Menu.
TCP/IP parameters on the Synergix Print Systems 8830/8825/8850/510dp are
read-only through the Web PMT and thus, can only be modified at the printer
control panel.
On the Synergix Print Systems 8855 and 721p, the TCP/IP parameters can be
modified by users with printer password. However, incorrect specification of
the TCP/IP parameters can result in the Web PMT losing all communication
with the printer.
1. DHCP enable - When this box is checked (enabled), the network interface
utilizes the Dynamic Host Configuration Protocol to acquire a temporary IP
Address for the networked device from a client that is supplying DHCP
services on the network. As constantly changing (temporary) IP addressing
can cause problems for users in network communications, the default value
for this feature is "not checked" (disabled).
WARNING - If this box is checked and there is no DHCP server on the
network, the Web PMT will be completely unusable. For the Synergix
Print System 8825, 8830, 8850, and 510dp you can use the Printer
Control Panel to undo this setting. For the Synergix Print System 8855
and 721, you will need to upload a recovery file to the Controller through
the serial or parallel port.
2. RARP/BOOTP enable - When this box is checked (enabled), the network
interface utilizes the RARP and BOOTP protocols to acquire an IP Address
from the appropriate server. Since the Controller should have been assigned
a fixed IP Address by the Systems Administrator, it should not be necessary
for the Controller to have to query the network to discover its IP Address. The
default setting for this feature, therefore, is "not checked" (disabled).
WARNING - If this box is checked and there is no RARP server on the