Filter
Top Products
Page 6 Web Print Manager Tool User Guide
Web Printer Manager Tool Requirements
To use the Web Printer Manager Tool (Web PMT) with firmware version 9.0, you
must have the following software and hardware:
• Synergix Print System 8825, 8830, 8850, 8855, 510dp, 721p, or X2-TECH
Printer
AccXES Controller, firmware version 8.0 Memory (RAM): Factory installed
RAM varies from 64 MB to 192 MB depending upon Controller model.
AccXES Controller with the integrated 10/100 BaseTX (Access to the Web
PMT is not supported over the 3003 XTP NIC, the serial port, or the
parallel port.)
- Tower Controller 2.0 (UP8) for 8855
- Embedded Controller 2.0 (N5T/CNG) for 8830 and 8850
- Embedded Controller 3.0 (EV4) for 8825
- Standalone Controller for X2-TECH (KLF)
- Standalone Controller for all printers when available (HFT)
Note that a 9GB or larger capacity hard drive is recommended to support
the optional Color Scan-to-Net and scan-to-print.
Optional Finishing Device (Folder)
Optional Adobe PostScript feature license to support PostScript printing
Optional Scan-to-Net feature license to support Scan-to-Net
Optional Scan-to-Print feature license
Desktop computer with Netscape Navigator 7.0 (or newer) or Microsoft
Internet Explorer 5.5 (or newer) installed.
Screen resolution required is 800x600, or higher.
A network connection based on the TCP/IP protocol