Filter
Top Products
136 • Main Menu XEROX WIDE FORMAT COPY SYSTEM
display NO RESPONSE FROM SCANNER if the Scan System does not
respond to the test request.
17. Press the Exit key to return to the Component Tests menu
screen.
The READ NVR option allows the examination of the contents of the
non-volatile RAM (NVR). The service center may ask you to provide this
information when calling for service.
To run the READ NVR diagnostic:
1. Press the
Menu key. The MAIN MENU screen is displayed.
2. Press the
Next key until DIAGNOSTICS is highlighted.
3. Press the
Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the
Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the
Enter key to select SCANNER DIAGNOSTICS. The
SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the
Next key until READ NVR is highlighted.
7. Press the
Enter key to select READ NVR. The READ NVR
screen is displayed. An "xx" displays for all the NVR values.
READ NVR
00 -07: xx xx xx xx xx xx xx xx
08 - 0F:
10-17:
18-1F:
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
PRESS START TO BEGIN
Read NVR Screen
8. Press the
Start key to display the actual values.
9. Press the
Previous or Next key to scroll through the values.
There are 16 rows of values in all.
10. Press the
Exit key to return to the SCANNER DIAGNOSTICS
screen.
The PASSWORD option of the DIAGNOSTICS menu is for use by the
Customer Service Engineer only. It allows the Customer Service
Engineer to enter the password for access to password-protected
diagnostic functions.
If you select this option, the PASSWORD screen is displayed. You
cannot perform any functions in this screen. Press the Exit key to return
to the COMPONENT TESTS menu screen.
READ NVR
PASSWORD