Filter
Top Products
Administrative Tools
WorkCentre 7425/7428/7435
System Administrator Guide
30
Setting PDL Emulations
To set the PDL (Page Description Language) Emulations, used by the printer's Input Ports, perform the
following steps:
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Services folder.
5. Click the Printing folder, then the Language Emulations folder.to see the Page Description
Languages currently supported by system software.
6. Click Print Mode to access a list of the printer's Input Ports, displaying the Page Description
Language emulations they are currently set to use.
7. Depending upon the Ports enabled at the printer, the list of displayed Ports includes: Parallel,
AppleTalk (with PostScript), SMB, LPD, IPP, WSD, and Port 9100. Typical Page Description
selections for each Port include: Auto (auto select), PostScript, HP-GL/2, PCL and TIFF/JPEG.
8. Click Apply.
Banner Sheet Printing
When documents are sent to print at the printer, a banner sheet is printed identifying the PC that sent
the print job. The banner sheet is printed on paper from a selected tray. When the selected tray is
empty, the printer will automatically switch to another tray with the same size paper and print the
banner sheet from that tray. The printer will continue to print banner sheets from this secondary tray
until the selected tray is refilled.
To set banner sheet printing and select a banner sheet paper tray:
1. Press the Log In/Out button on the control panel.
2. Enter the System Administrator’s Login ID and Passcode if prompted (default admin, 1111), and
press Enter.
3. Press the Machine Status button.
4. Touch the Tools tab.
5. Touch System Settings.
6. In the Group column, touch Print Service Settings.
7. In the Features column, touch Other Settings.
8. On the Other Settings screen, in the Items column, touch Banner Sheet, then touch Change
Settings.
9. On the Banner Sheet screen, select one of the following:
•Off
• Start Sheet (the default choice)
•End Sheet
• Start Sheet & End Sheet
10. Touch Save.