Filter
Top Products
TCP/IP LPD Enablement
WorkCentre 7425/7428/7435
System Administrator Guide
47
LPD Maximum Number of Sessions
1. Select LPD – Maximum Number of Sessions.
2. Press Change Settings.
3. Select a number from 1 to 10.
4. To change settings, press Save.
5. To exit, without making changes, press Cancel.
Exiting the LPD Selections Menu
To exit the LPD selections menu, which returns you to the Port Settings menu, press the Close button in
the upper right corner of the touch screen.
Exiting the Port Settings Menu and Returning to the Tools Tab
1. To exit the Port Settings menu, returning to the printer's Tools screen, press the Close button in the
upper right corner of the Port Settings menu screen.
2. Wait several seconds and the Auto Clear service should log you out.
Note: If you changed any settings in the Port Settings menu, the printer will automatically reboot to
register and enable your new settings.