Filter
Top Products
114 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002
5: ZXP Series Toolbox
Cleaning
Clean Laminator
The Clean Laminator screen gives you the option to clean the laminator via the Toolbox; refer
to Section 6, for cleaning via the OCP.
• Laminator Card Path cleaning interval can be adjusted depending on the printer
operating environment. The default cleaning interval is every 5,000 cards. A running card
count is displayed indicating the number of cards printed since last cleaning. Click the
Clean button to start the cleaning process. For details, see Clean the Laminator Card Path
on page 135.
• Laminator Roller cleaning interval can be adjusted depending on the printer operation
environment. The default cleaning interval is every 5,000 cards. A running card count is
displayed indicating the number of cards printed since last cleaning. Click the
Clean button to start the cleaning process. For details, see Clean the Laminator Media
Rollers on page 136.
• Laminator Oven (Heater Rollers) cleaning interval can be adjusted depending on the
printer operation environment. The default cleaning interval is every 20,000 cards. A
running card count is displayed indicating the number of cards printed since last cleaning.
Click the Clean button to start the cleaning process. For details, see Clean the Laminator
Oven (Heater Rollers) on page 138.
The Restore Defaults button resets the cleaning interval settings to the factory defaults.
The Save button saves any changes you have made to this screen.