Filter
Top Products
3: Operation
Operator Control Panel (OCP)
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 55
Warning Messages
Warnings alert the operator to action that should be taken; the printer will generally
continue operation.
Error Messages
Refer to Section 7, Troubleshooting, for a list of the error messages, possible causes, and
possible solutions.
Errors are displayed when a situation causes the printer to stop operating. Depending on the
cause of the error message, restarting the printer or clearing the displayed error may return the
printer to operational status; or the printer may require troubleshooting and repair.
WARNING
(Printer will still operate)
DESCRIPTION
BOTH LAMINATES LOW Indicates that both Laminate cassettes (Top and Bottom) are
low; see Loading the Laminate on page 18.
BOTTOM LAMINATE LOW Indicates that the Bottom Laminate cassette is low; see Loading
the Laminate on page 18.
CLEAN FEEDER Indicates that the Feeder needs cleaning; see Cleaning the
Printer on page 130.
CLEAN CARD PATH Indicates that the Printer Card Path needs cleaning; see
Cleaning the Printer on page 130.
CLEAN LAM CARD PATH Indicates that the Laminator Card Path needs cleaning; see
Cleaning the Laminator on page 134.
CLEAN LAM ROLLERS Indicates that the Laminator Rollers need cleaning; see
Cleaning the Laminator on page 134.
CLEAN LAM OVEN Indicates that the Laminator Heated Rollers need cleaning; see
Clean the Laminator Oven (Heater Rollers) on page 138.
RIBBON LOW Indicates that the Ribbon spool is low; see Loading a Print
Ribbon on page 15.
TOP LAMINATE LOW Indicates that the Top Laminate cassette is low; see Loading the
Laminate on page 18.