Filter
Top Products
134 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002
6: Cleaning
Cleaning the Laminator
Cleaning the Laminator
When to Clean
Cleaning requirements vary according to the environment. For a typical office environment,
the recommended cleaning cycle is:
• Laminator Card Path cleaning should occur every 5,000 cards.
• Laminator Roller cleaning should occur every 5,000 cards.
• Laminator Oven (Heater Rollers) cleaning should occur every 20,000 cards.
Initiate the cleaning process:
Step 1. Press the MENU button on the Operator Control Panel (OCP). The OCP will
display the Main Menu.
Step 2. Scroll through the Main Menu, and select Advanced Settings. The OCP will
display the Advanced Settings Menu.
Step 3. Scroll through the Advanced Settings Menu, and select Clean Printer. The OCP
will display the Clean Printer Menu.
NOTE • To order ZXP Series 7 cleaning supplies, see http://www.zebra.com/supplies
for details.
NOTE • To avoid a long wait while the heated rollers cool to 60
o
C, perform cleaning before
the rollers heat; i.e., when first turned on and the rollers are still cold.