7: Troubleshooting
Ethernet
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 151
Ethernet
• Indicators -- Detail
• Link Speed Indicator (Orange)
• Link Activity Indicator (Green)
•Issues
If both
LEDs are off, the printer has not detected the presence of a network cable. To solve
the problem:
• Verify that the network cable is appropriate and has an RJ-45 connector.
• Remove the network cable from the printer. Plug the network cable back in until you
hear a positive click. Check the other end of the cable in the same manner. If the
printer still does not detect a cable, then continue.
• Connect the printer to a known good network. If the printer is still unable to detect the
network cable, contact Technical Support for assistance.
Off No link (disconnected)
1 Blink The LED blinks once (one blink, pause, one blink, etc.) when a
10Base link has been established.
2 Blinks The LED blinks twice (two blinks, pause, two blinks, etc.) when
a 100Base link has been established.
Off No link (disconnected)
On Network link has been established
Blinking Network activity has been detected
Link Speed Link Activity