Filter
Top Products
Chapter 6 Configuration Basics
ZyWALL USG 1000 User’s Guide
105
subscription to update the anti-virus and IDP/application patrol signatures You
must have Internet access to myZyXEL.com.
6.5.4 Interface
See Section 6.2 on page 96 for background information.
Note: When you create an interface, there is no security applied on it until you assign
it to a zone.
Most of the features that use interfaces support Ethernet, PPPoE/PPTP, cellular,
VLAN, and bridge interfaces.
6.5.5 Trunks
Use trunks to set up load balancing using two or more interfaces.
Example: See Chapter 7 on page 119.
6.5.6 Policy Routes
Use policy routes to override the ZyWALL’s default routing behavior in order to
send packets through the appropriate interface or VPN tunnel. You can also use
policy routes for bandwidth management (out of the ZyWALL), port triggering,
and general NAT on the source address. You have to set up the criteria, next-hops,
and NAT settings first.
MENU ITEM(S)
Configuration > Licensing > Update
PREREQUISITES
Registration (for anti-virus and IDP/application patrol), Internet
access to myZyXEL.com
MENU ITEM(S)
Configuration > Network > Interface (except Network >
Interface > Trunk)
PREREQUISITES
Port groups (configured in the Interface > Port Grouping screen)
WHERE USED
Zones, trunks, IPSec VPN, device HA, DDNS, policy routes, static
routes, HTTP redirect, NAT, application patrol
MENU ITEM(S)
Configuration > Network > Interface > Trunk
PREREQUISITES
Interfaces
WHERE USED
Policy routes
MENU ITEM(S)
Configuration > Network > Routing > Policy Route