Chapter 7 Tutorials
ZyWALL USG 1000 User’s Guide
135
2 Enter the name of the group that is used in Table 20 on page 133. In this example,
it is “Finance”. Then, select User/Leo and click the right arrow to move him to the
Member list. This example only has one member in this group, so click OK. Of
course you could add more members later.
Figure 85 Configuration > Object > User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.
7.6.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the
settings for the RADIUS server. Then, set up the authentication method, and
configure the ZyWALL to use the authentication method. Finally, force users to log
in to the ZyWALL before it routes traffic for them.