Filter
Top Products
Chapter 6 Configuration Basics
ZyWALL USG 1000 User’s Guide
115
If you want to force users to log in to the ZyWALL before the ZyWALL routes traffic
for them, you might have to configure prerequisites first.
6.7 System
This section introduces some of the management features in the ZyWALL. Use
Host Name to configure the system and domain name for the ZyWALL. Use
Date/Time to configure the current date, time, and time zone in the ZyWALL.
Use Console Speed to set the console speed. Use Language to select a language
for the Web Configurator screens.
6.7.1 DNS, WWW, SSH, TELNET, FTP, SNMP, Dial-in Mgmt,
Vantage CNM
Use these screens to set which services or protocols can be used to access the
ZyWALL through which zone and from which addresses (address objects) the
access can come. Use Dial-in Mgmt for a remote management connection
through an external serial modem connected to the AUX port.
Example: Suppose you want to allow an administrator to use HTTPS to manage
the ZyWALL from the WAN.
1 Create an administrator account (Configuration > Object > User/Group).
guest Access network services
ext-user The same as a user or a guest except the ZyWALL looks for the
specific type in an external authentication server. If the type is not
available, the ZyWALL applies default settings.
ext-group-user External group user account.
MENU ITEM(S)
Object > User/Group
PREREQUISITES
Addresses, address groups, schedules. The prerequisites are only
used in policies to force user authentication
WHERE USED
Policy routes, firewall, application patrol, content filter, user groups,
VPN
Table 19 User Types
TYPE ABILITIES
MENU ITEM(S)
Configuration > System > DNS, WWW, SSH, TELNET, FTP,
SNMP, Dial-in Mgmt, Vantage CNM, Language
PREREQUISITES
To-ZyWALL firewall, zones, addresses, address groups, certificates
(WWW, SSH, FTP, Vantage CNM), authentication methods (WWW)