Filter
Top Products
Chapter 56 Troubleshooting
ZyWALL USG 1000 User’s Guide
885
The ZyWALL’s traffic throughput rate decreased after I started collecting traffic
statistics.
Data collection may decrease the ZyWALL’s traffic throughput rate.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use “#” or “!” as the first character of a
command line to have the ZyWALL treat the line as a comment.
• Your configuration files or shell scripts can use “exit” or a command line
consisting of a single “!” to have the ZyWALL exit sub command mode.
•Include write commands in your scripts. Otherwise the changes will be lost
when the ZyWALL restarts. You could use multiple write commands in a long
script.
Note: “exit” or “!'” must follow sub commands if it is to make the ZyWALL exit sub
command mode.
See Chapter 52 on page 847 for more on configuration files and shell scripts.
I cannot get the firmware uploaded using the commands.
The Web Configurator is the recommended method for uploading firmware. You
only need to use the command line interface if you need to recover the firmware.
See the CLI Reference Guide for how to determine if you need to recover the
firmware and how to recover it.
My packet capture captured less than I wanted or failed.