ZyXEL Communications 1000 Network Router User Manual


  Open as PDF
of 1075
 
Appendix A Log Descriptions
ZyWALL USG 1000 User’s Guide
937
Device is rebooted by
administrator!
An administrator restarted the device.
Insufficient memory. Cannot allocate system memory.
Connect to dyndns
server has failed.
Cannot connect to members.dyndns.org to update DDNS.
Update the profile %s
has failed because of
strange server
response.
Update profile failed because the response was strange, %s is
the profile name.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update the profile %s
has succeeded.
Update profile succeeded, %s is the profile name.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update profile failed because FQDN for the profile is invalid
for DynDNS, 1st %s is the profile name, 2nd %s is the FQDN
of the profile.
Update the profile %s
has failed because the
FQDN %s is malformed.
The FQDN format is malformed for DynDNS server, 1st %s is
the profile name, 2nd %s is the FQDN of the profile.
Update the profile %s
has failed because the
FQDN %s is not under
your control.
The owner of this FQDN is not the user, 1st %s is the profile
name, 2nd %s is the FQDN of the profile.
Update the profile %s
has failed because the
FQDN %s was blocked
for abuse.
The FQDN is blocked by DynDNS, 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Update the profile %s
has failed because of
authentication fail.
Try to update profile, but failed, because of authentication
fail, %s is the profile name.
Update the profile %s
has failed because of
invalid system
parameters.
Some system parameters are invalid to update FQDN, %s is
the profile name.
Update the profile %s
has failed because the
FQDN %s was blocked.
The FQDN is blocked by DynDNS , 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Update the profile %s
has failed because too
many or too few hosts
found.
%s is the profile name.
Update the profile %s
has failed because of
dyndns internal error
Update profile failed because of a dynsdns internal error, %s
is the profile name.
Table 278 System Logs (continued)
LOG MESSAGE DESCRIPTION