Filter
Top Products
Chapter 10 Monitor
ZyWALL USG 1000 User’s Guide
228
Name This field displays the name of each interface. If there is a Expand icon
(plus-sign) next to the name, click this to look at the status of virtual
interfaces on top of this interface.
Port This field displays the physical port number.
Status This field displays the current status of each interface. The possible
values depend on what type of interface it is.
For Ethernet interfaces:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).
For cellular (3G) interfaces, see Section 10.9 on page 239 for the status
that can appear.
For the auxiliary interface:
Inactive - The auxiliary interface is disabled.
Connected - The auxiliary interface is enabled and connected.
Disconnected - The auxiliary interface is not connected.
For virtual interfaces, this field always displays Up. If the virtual
interface is disabled, it does not appear in the list.
For VLAN and bridge interfaces, this field always displays Up. If the
VLAN or bridge interface is disabled, it does not appear in the list.
For PPP interfaces:
Connected - The PPP interface is connected.
Disconnected - The PPP interface is not connected.
If the PPPP interface is disabled, it does not appear in the list.
HA Status This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right now.
For example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
Zone This field displays the zone to which the interface is assigned.
Table 30 Monitor > System Status > Interface Status (continued)
LABEL DESCRIPTION