Filter
Top Products
Chapter 13 Interfaces
ZyWALL USG 1000 User’s Guide
307
Data Budget Select this and specify how much downstream and/or upstream data
(in Mega bytes) can be transmitted via the 3G connection within one
month.
Select Download to set a limit on the downstream traffic (from the
ISP to the ZyWALL).
Select Upload to set a limit on the upstream traffic (from the ZyWALL
to the ISP).
Select Download/Upload to set a limit on the total traffic in both
directions.
If you change the value later, the ZyWALL resets the statistics.
Reset time and
data budget
counters on
Select the date on which the ZyWALL resets the budget every month.
If the date you selected is not available in a month, such as 30th or
31th, the ZyWALL resets the budget on the last day of the month.
Reset time and
data budget
counters
This button is available only when the 3G card is connected.
Click this button to reset the time and data budgets immediately. The
count starts over with the 3G connection’s full configured monthly
time and data budgets. This does not affect the normal monthly
budget restart; so if you configured the time and data budget
counters to reset on the second day of the month and you use this
button on the first, the time and data budget counters will still reset
on the second.
Actions when over
budget
Specify the actions the ZyWALL takes when the time or data limit is
exceeded.
Log Select None to not create a log, Log to create a log, or Log-alert to
create an alert log. If you select Log or Log-alert you can also select
recurring every to have the ZyWALL send a log or alert for this
event periodically. Specify how often (from 1 to 65535 minutes) to
send the log or alert.
New 3G
connection
Select Allow to permit new 3G connections or Disallow to drop/block
new 3G connections.
Current 3G
connection
Select Keep to maintain an existing 3G connection or Drop to
disconnect it. You cannot set New 3G connection to Allow and
Current 3G connection to Drop at the same time.
If you set New 3G connection to Disallow and Current 3G
connection to Keep, the ZyWALL allows you to transmit data using
the current connection, but you cannot build a new connection if the
existing connection is disconnected.
Actions when over
% of time budget
or % of data
budget
Specify the actions the ZyWALL takes when the specified percentage
of time budget or data limit is exceeded. Enter a number from 1 to 99
in the percentage fields. If you change the value later, the ZyWALL
resets the statistics.
Select None to not create a log when the ZyWALL takes this action,
Log to create a log, or Log-alert to create an alert log. If you select
Log or Log-alert you can also select recurring every to have the
ZyWALL send a log or alert for this event periodically. Specify how
often (from 1 to 65535 minutes) to send the log or alert.
Table 65 Configuration > Network > Interface > Cellular > Add (continued)
LABEL DESCRIPTION