Filter
Top Products
Chapter 3 Web Configurator
ZyWALL USG 1000 User’s Guide
57
Interface Port Grouping Configure physical port groups.
Ethernet Manage Ethernet interfaces and virtual Ethernet
interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an
installed 3G card.
VLAN Create and manage VLAN interfaces and virtual
VLAN interfaces.
Bridge Create and manage bridges and virtual bridge
interfaces.
Auxiliary Manage the AUX port.
Trunk Create and manage trunks for load balancing and
link HA.
Routing Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including
areas and virtual links.
Zone Configure zones used to define various policies.
DDNS Profile Define and manage the ZyWALL’s DDNS domain
names.
NAT Set up and manage port forwarding rules.
HTTP Redirect Set up and manage HTTP redirection rules.
ALG Configure SIP, H.323, and FTP pass-through
settings.
IP/MAC
Binding
Summary Configure IP to MAC address bindings for devices
connected to each supported interface.
Exempt List Configure ranges of IP addresses to which the
ZyWALL does not apply IP/MAC binding.
Auth. Policy Define rules to force user authentication.
Firewall Firewall Create and manage level-3 traffic rules.
Session Limit Limit the number of concurrent client NAT/firewall
sessions.
VPN
IPSec VPN VPN Connection Configure IPSec tunnels.
VPN Gateway Configure IKE tunnels.
Concentrator Configure VPN concentrators (hub-and-spoke
VPN).
SSL VPN Access Privilege Configure SSL VPN access rights for users and
groups.
Global Setting Configure the ZyWALL’s SSL VPN settings that
apply to all connections.
Table 6 Configuration Menu Screens Summary (continued)
FOLDER OR
LINK
TAB FUNCTION