Filter
Top Products
Chapter 7 Wireless LAN
AMG1312-T Series User’s Guide
101
The following table describes the labels in this screen.
7.9 The Advanced Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See Section 7.10.2 on page 104 for detailed definitions of the terms listed in this screen.
Figure 39 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Table 27 Network Setting > Wireless > Scheduling
LABEL DESCRIPTION
Wireless LAN
Scheduling
Select Enable or Disable to activate or deactivate wireless LAN scheduling on your
AMG1312-T Series.
State Select On or Off to enable or disable the wireless LAN.
Day Check the day(s) you want to turn the wireless LAN on or off.
Time (24-Hour
Format)
Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned on only during this time period.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 28 Network Setting > Wireless> Advanced
LABEL DESCRIPTION
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Output Power Set the output power of the AMG1312-T Series. If there is a high density of APs in an
area, decrease the output power to reduce interference with other APs. Select one of the
following: 100%, 75%, 50% or 25%.
Preamble Select a preamble type from the drop-down list menu. Choices are Long or Short. See
the Appendix D on page 268 for more information.