ZyXEL Communications 2 Network Router User Manual


 
Chapter 8 Home Networking
AMG1312-T Series User’s Guide
120
The following table describes the labels in this screen.
If you click Add new static lease in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays.
Figure 50 Static DHCP: Add/Edit
The following table describes the labels in this screen.
8.4 The IP Alias Screen
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The AMG1312-T Series supports multiple logical LAN interfaces via its physical
Ethernet interface with the AMG1312-T Series itself as the gateway for the LAN network.
Table 32 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTION
Add new static lease Click this to add a new static DHCP entry.
# This is the index number of the entry.
Active This field displays whether the client is connected to the AMG1312-T Series.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to
confirm that you want to delete the selected entry.
Table 33 Static DHCP: Add/Edit
LABEL DESCRIPTION
MAC Address If you select Manual Input in the Select Device Info field, enter the MAC address of
a computer on your LAN.
IP Address If you select Manual Input in the Select Device Info field, enter the IP address that
you want to assign to the computer on your LAN with the MAC address that you will
also specify.
OK
Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.