Filter
Top Products
AMG1312-T Series User’s Guide 34
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the AMG1312-T Series’s various features.
• Setting Up Your DSL Connection, see page 34
• IPv6 Address Configuration, see page 36
• Setting Up a Secure Wireless Network, see page 37
• Configuring the MAC Address Filter for Restricting Wireless Internet Access, see page 44
• Setting Up NAT Forwarding for a Game Server, see page 45
• Setting Up NAT Forwarding for a Game Server, see page 45
• Configuring Firewall Rules to Allow a Specified Service, see page 47
• Configuring Static Route for Routing to Another Network, see page 50
• Port Binding Configuration, see page 52
• Configuring QoS to Prioritize Traffic, see page 56
• Access the AMG1312-T Series from the Internet Using DDNS, see page 59
4.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the web configurator.
If you connect to the Internet through a DSL connection, use the information from your Internet
Service Provider (ISP) to configure the AMG1312-T Series. Do the following steps:
1 Connect the AMG1312-T Series properly. Refer to the Quick Start Guide for details on the
AMG1312-T Series’s hardware connection.
2 Connect one end of a DSL cable to the DSL port of your AMG1312-T Series. The other end should be
connected to the DSL port in your house or a DSL router/modem provided by your ISP.
3 Connect one end of Ethernet cable to an Ethernet port on the AMG1312-T Series and the other end
to a computer that you will use to access the web configuration.
4 Connect the AMG1312-T Series to a power source, turn it on and wait for the POWER LED to
become a steady green.