Filter
Top Products
Chapter 7 Wireless LAN
AMG1312-T Series User’s Guide
90
7.2.1 No Security
Select No Security to allow wireless stations to communicate with the access points without any
data encryption or authentication.
Note: If you do not enable any wireless security on your AMG1312-T Series, your network
is accessible to any wireless networking device that is within range.
Figure 28 Wireless > General: No Security
7.2.2 Basic (WEP Encryption)
WEP encryption scrambles the data transmitted between the wireless stations and the access points
(AP) to keep network communications private. Both the wireless stations and the access points
must use the same WEP key.
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the AMG1312-T Series. When you select to use a
security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any
data encryption or authentication.
See the following sections for more details about this field.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 17 Network Setting > Wireless > General (continued)
LABEL DESCRIPTION