Filter
Top Products
Chapter 12 Port Binding
AMG1312-T Series User’s Guide
158
If a WAN PVC is bound to an ethernet port, traffic from the ethernet port will only be forwarded
through the specified WAN PVC and vice versa. If a port is not in a port binding group, traffic to and
from the port will be forwarded according to the routing table. See the tutorial section (Section on
page 34) for more details on configuring port binding for multiple WAN connections.
12.1.1 What You Can Do in the Port Binding Screens
•Use the General screen (Section 12.3 on page 158) to activate port binding.
•Use the Port Binding screen (Section 12.3 on page 158) to set up port binding groups.
•Use the Port Binding Summary screen (Section 12.3.1 on page 159) to view configured port
binding groups.
12.2 The Port Binding General Screen
Use this screen to activate port binding and set up port binding groups. Click Network Setting >
Port Binding to display the following screen.
Figure 78 Network Setting > Port Binding
The following table describes the labels in this screen.
12.3 The Port Binding Screen
Use this screen to set up port binding groups. Click Network Setting > Port Binding > Port
Binding to display the following screen.
Table 58 Network Setting > Port Binding
LABEL DESCRIPTION
Activated Port Binding Activate or deactivate the port binding feature.
Apply Add the selected port binding group configuration.