Filter
Top Products
AMG1312-T Series User’s Guide 210
CHAPTER 25
Remote Management
25.1 Overview
Remote management allows you to determine which services/protocols can access which
AMG1312-T Series interface (if any) from which computers.
The following figure shows remote management of the AMG1312-T Series coming in from the WAN.
Figure 120 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a IP filter rule to allow access.
You may manage your AMG1312-T Series from a remote location via:
• Internet (WAN only)
•LAN only
•LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding Service Access
field.
25.1.1 What You Can Do in the Remote Management Screens
•Use the WWW screen (Section 25.2 on page 211) to configure through which interface(s) and
from which IP address(es) users can use HTTP to manage the AMG1312-T Series.
•Use the Telnet screen (Section 25.3 on page 213) to configure through which interface(s) and
from which IP address(es) users can use Telnet to manage the AMG1312-T Series.
•Use the FTP screen (Section 25.4 on page 213) to configure through which interface(s) and from
which IP address(es) users can use FTP to access the AMG1312-T Series.
LAN
WAN
HTTP
Telnet