Filter
Top Products
Chapter 3 Internet / Wireless Setup Wizard
AMG1312-T Series User’s Guide
31
Figure 12 Internet Connection with PPPoE
The following table describes the fields in this screen.
• If the user name and/or password you entered for PPPoE or PPPoA connection are not correct,
you are prompted to enter the correct information.
• If the Internet connection fails, check to see if your account is activated.
Table 6 Internet Connection with PPPoE
LABEL DESCRIPTION
User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Password Enter the password associated with the user name above.
Multiplex Select the multiplexing method used by your ISP from the Multiplex drop-down list
box either VC-based or LLC-based.
VPI Enter the Virtual Path Identifier (VPI) assigned to you. This field may already be
configured.
VCI Enter the Virtual Channel Identifier (VCI) assigned to you. This field may already be
configured.
Select Yes to enter specific IP information from your Internet service provider. Enter your Internet
access information exactly as your service provider gave it to you.
IP Address Enter the IP address of the AMG1312-T Series.
Primary DNS
Server
Enter the primary DNS server IP address for the AMG1312-T Series.
Secondary
DNS Server
Enter the secondary DNS server IP address for the AMG1312-T Series.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Exit Click this to close the wizard screen without saving.